Woochie Prosthetic Pig Nose Cinema Secrets

Get this Woochie prosthetic pig nose and chin set at U Make It Up Costumes.

• Description: The Woochie Pig Face consists of two light weight latex appliances. One fits over the nose and the other fits on the chin to create the look of a pig. Available in small or large.
• Includes: Two pieces- a snout and a chin plus instructions.
• Size: Two sizes. Small (The small pig snout measures 2’’ across and is about 2’’ deep. The chin is 3 ½’’ deep.) Large (The large pig snout measures 3’’ across and is 2 ¼’’ deep. The chin is 4’’ deep.)
• Additional Spirit Gum (not included) is needed to attach the pig face.

How to Use:

1. Although most of the appliances can be worn in several places, it is best to check for proper alignment of some pieces.
2. Edges may be trimmed for a better fit.
3. Brush Spirit Gum on the back of the Woochie appliance anywhere it the will be touching the skin.
4. Spirit Gum may also be applied directly to the skin.
5. Position the Woochie appliance onto the skin in the desired area and press into place. For best adhesion, remove the Woochie appliance and use the appliance itself (or your index finger) to tack the Spirit Gum with a rapid up and down motion. This will cause the Spirit Gum to become extremely tacky. Then firmly press the appliance back into place.
6. Optional Suggestions for a more professional look-For thinner edges, after applying the appliance to your skin with Spirit Gum, the edges of the appliance may be stippled, using a small piece of White Latex Sponge, with a thin coat of Liquid Latex.
7. Allow this to dry before applying a second coat. A hair dryer set on low will help speed up the drying time.
8. Powder the dried latex when finished.
9. After the adhering the Woochie appliance you may want to make your piece blend in better. To do this you will need Cream Foundation, Castor Sealer, and Colorless Powder.
10. Begin by tearing a white latex sponge in half, and using the rough side of the sponge, place a small amount of Castor Sealer on the sponge and dip the sponge into the color that comes closest  foundation to match your skin tone. Apply makeup to the appliance in a patting, or “stippling,” motion.
11. Next using a darker makeup color, shade the Woochie appliance in the appropriate areas. Lastly, using the lightest of the makeup colors, apply the makeup to the highpoints of the Woochie appliance.
12. Finally, powder the appliance using Colorless Powder to set the makeup.
13. Removal-Using a small brush or cotton swab work a small amount of Spirit Gum Remover under the edges of the Woochie® appliance. Once removed, remove any residual adhesive or makeup by rubbing more remover into the area. Rinse the skin using a towel and warm water.
14. For additional applications, clean the Woochie appliance with soap and water and a small amount of alcohol. Let dry and store out of the damaging rays of direct sunlight.

WARNINGS: If you are sensitive to latex, discontinue use.